Insulated Bullet Connectors Cable Lugs

The application of copper terminal is very extensive, in the industry is mainly to act as a connector, some electrical connection.  Copper Terminals can ensure the reliability and convenience of electrical circuit connection.  The copper Terminals is at the end of the wire and then use the special crimping pliers to connect the copper terminal to the wire and then fix the Copper Tube Terminals in the position you want to fix it.  Usually Copper Terminals material is red copper, brass or phosphor bronze car system, its yield strength is low, good plasticity, and parts for axisymmetric shape, especially suitable for cold extrusion forming.  Note the following when using copper terminals:  
1. Tighten the wiring with moderate force to prevent excessive force from causing the sliding bolt. If the sliding bolt and nut are found to be replaced in time, immediate operation is strictly prohibited.  
2. When fastening or loosening the screws with a screwdriver, it is necessary to tighten the screws forcibly, and then tighten or loosen them to prevent the screwdriver and the screws from slipping, resulting in screw damage and not easy to disassemble, especially the empty boxes commonly used in the hanging box.  
3, found that it is difficult to disassemble bolts and nuts, can not be reckless operation, to prevent deformation and more difficult to disassemble, should be properly knocked, or add bolt loosening agent, dilute hydrochloric acid and so on after disassembly. 

Insulated bullet/socket terminals

1, Cable Lugs are suitable for the connection of copper conductors in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.
3, Working temperature -55oC-150oC
4, Surface: Tin-plated
5, Insulated material: PVC, nylon