Insulated Female Connectors Bf250 Terminals

The crimping mechanism of wiring  Copper Terminals is the mechanism that produces pressure between the wire and the conductive strip. Only enough pressure can be generated to ensure a low contact resistance and form a good connection. Therefore, the reliability of the crimping mechanism directly affects the quality of the connection of the wire.  For threaded Terminals, screws, copper posts and pressure plates are important components of the clamping mechanism, while for non-threaded terminals, springs or spring cards are important components of the clamping mechanism.  No thread terminal, the pressing mechanism is mainly spring, so the selection of spring is very important, both to ensure that there is enough contact pressure, to ensure that the wire will not be too damaged, spring terminal is currently more reliable without thread Cold-pressed Cold-pressed Terminal.  When entering the line, you can press the spring by pushing the block or screwdriver, after entering the line, loosen the spring, use the spring back tension to press the wire tightly, produce enough contact pressure, and then use the edge of the spring to choke the wire, so that it will not loose or artificially pull out. 

Insulated male/female terminals

1, Cable Lugs are suitable for the connection of copper conductors in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.
3, Working temperature -55oC-150oC
4, Surface: Tin-plated

5, Insulated material: PVC, nylon