Cable with Sunlight Resistance Copper Conductor Terminals

Contact force is one of the basic elements in terminal blocks.  If there is not enough contact pressure, a good conductive material is of no use.  Because, if the contact force is too low, there will be displacement between the wire and the conductive sheet, resulting in oxidative pollution, so that the contact resistance increases and lead to overheating.  In the case of the DRTB2.5 pressed wire frame assembly, an actual contact force of up to 750N can be generated by applying only 0.8Nm of torque to the screw, independent of the wire cross section.  Therefore, the use of Copper Tube Terminals crimping frame has no environmental influence, large contact area, large contact force permanent connection.  Voltage drop small contact voltage drop size is also one of the dimensions to identify the quality of the wiring block.  Even with a small force distance applied to the screw, the voltage drop value is still significantly lower than the limit required by VDE0611.  Meanwhile, the applied torque varies over a wide range and the voltage drop is almost constant.  Therefore, although different operators use different amounts of torque, it does not affect the quality of the connection.  This is another proof of the reliability of the crimping frame at the Copper Terminals.  A contact force with a large self-locking function is meaningful only if it is persistently applied to the wire. 

AWG Cable Lugs are suitable for the connection of copper conductors (section 1.5-630mm2) in power cable with electronic equipment, they are made of higher 99.99 % pure copper tube T2 and coated with tin. Working temperature -55oC-150oC.

The company has more than 95% of the full automatic production lines, nissan 200 tons, production capacity continues to adjust and expand, to meet the challenge of the market at any time.
Through the European CE safety certification, American UL safety certification, the company has a SC Japan JIS standard, the German DIN standards, AWG American standards, etc.
Companies always adhere to: quality first, service first, from raw materials into the factory inspection, process inspection to every working procedure, outbound packaging cengcengbaguan .
Company has own copper pipe, copper strip, copper platoon of raw material processing factory, with strong competitive advantage price on equal quality to every guest get the maximum benefits.

Material: High Conductivity Copper
Purity: >99.9%
Coating: Acid washing

AWG COPPER TUBE Terminals
 


Certificate:




PACKING: